Kitchen Remodel Cost Calculator

Start here: use the prefilled room area or enter your own, then calculate. The address and detailed measurements are optional and can improve location review and the material takeoff.

Why HHM asks for this information

Project address: identifies the state, county, likely permit authority, service area, taxes, delivery/travel context, and local labor/pricing research area.
Room dimensions and openings: calculate floor, wall, backsplash, countertop, cabinet, tile, and coating quantities instead of relying only on a broad room-size allowance.
Scope and finish level: tell HHM which trades, product classes, design effort, supervision, and risk review the project may require.
Known separate costs and waste: prevent omitted items and help convert measured coverage into realistic order quantities.
Photos and visualizer choices: help connect the desired appearance to the measured scope and supported products; photos never replace field verification.

Carolina region Recorded in your summary only. This tool applies no regional cost adjustment.

Project address (optional for estimate) Add it when available to attach service-area and county/jurisdiction context. It is not required for the preliminary calculation.

Approximate room area (square feet) Enter 50–600 square feet.

Current planning scope Recorded in your summary only; it does not change the benchmark calculation.

Finish expectation Recorded in your summary only; it does not change the benchmark calculation.

Separate documented cost not included in the benchmark (USD) Use only for a documented cost outside the benchmark; otherwise leave zero. The calculator cannot detect duplicate costs—do not add an item that may already be represented in the broad benchmark.

Planning contingency The selected planning reserve applies to the area-based benchmark subtotal. HHM confirms the appropriate project reserve after reviewing the property and scope.

Optional: add measurements for a detailed material takeoff

Measured project dimensions and material takeoff

Enter field measurements when available. Length and width establish floor area; ceiling height and openings establish net wall area; cabinet runs drive cabinet quantities; island dimensions and base-cabinet runs help estimate countertop coverage; backsplash dimensions drive finish coverage; shower dimensions drive receptor and wet-wall quantities. These values are shared with the HHM visual-planning brief.

Room length (ft)

Room width (ft)

Ceiling height (ft)

Doors/windows to subtract (sq. ft.)

Flooring/tile waste allowance

Base-cabinet run (linear ft.)

Upper-cabinet run (linear ft.)

Island length (ft.)

Island width (ft.)

Backsplash run (linear ft.)

Backsplash height (in.)

Measurement status: The calculator uses the entered dimensions for preliminary material quantities. HHM verifies field dimensions, product coverage, waste, substrate, layout, code, and installation requirements before a final agreement.

Project location and permit path

Project-location report

Address verification begins when the preliminary proposal is calculated.

Address- and scope-based preliminary routing

Likely permit and review path

Complete the calculator to create a preliminary permit checklist.

Building / alteration: Pending scope review.
Plumbing: Pending fixture and piping review.
Electrical: Pending circuit, lighting, and equipment review.
Mechanical / ventilation / fuel gas: Pending appliance, exhaust, HVAC, and fuel review.
Other approvals: Historic-district, zoning, HOA, utility, septic/well, fire, or floodplain review may apply to the property or scope.

HHM uses the submitted address to identify the likely authority having jurisdiction and prepares the application path. The city, county, or other authority confirms the final permits, plan review, inspections, fees, and licensed-trade requirements. This preliminary routing is not permit approval.

Measured material takeoff

Dimension-driven material takeoff

Measured room area	Not entered
Flooring/tile order area	Not entered
Net wall finish area	Not entered
Base cabinets	Not entered
Upper cabinets	Not entered
Preliminary countertop area	Not entered
Backsplash finish area	Not entered
Shower receptor area	Not entered
Three-wall wet-area finish	Not entered

Quantities are planning takeoffs, not purchase orders. Product-specific coverage, pattern, cuts, attic stock, breakage, substrate, edge treatment, and field verification may change order quantities.

Independent educational references—not a quote

Two planning signals for your project

These figures come from different methods. Do not add, average, or treat either as an HHM price, minimum, floor, estimate, or recommended budget.

Signal 1: Area-based market evidence band

–

Method
Inputs and limits
Geography: National or cited editorial ranges; no Carolina regional adjustment.

Small rooms can appear comparatively low because this formula does not model project minimums, mobilization, design, permits, trade setup, or other fixed costs.

Signal 2: National major kitchen remodel survey median

No comparable national survey median is shown because the selected scope does not match the study’s exact major-remodel definition.

Your adjusted planning worksheet—not a source benchmark

–

Worksheet formula
Selected worksheet inputs

This worksheet applies your selected reserve to the area-based evidence subtotal and then adds your separate documented cost. It remains a preliminary planning result until HHM verifies the complete project scope.

Why the figures may differ

The area band is an editorial formula. The second figure is a survey median for a defined major-remodel category. Differences may reflect fixed project costs, included scope, product level, geography, reporting method, and survey population. The sources are not blended, and neither replaces HHM’s property-specific scope and pricing review.

Your planning result: HHM confirms the project scope, selections, site conditions, schedule, and final price in your detailed proposal.

Planning summary

HHM Kitchen Design & Remodeling Plan

Carry the layout, cabinet runs, island, countertop, backsplash, finishes, systems, and measured takeoff into HHM design, selections, pricing, and construction planning.

Your address, selected scope, measurements, takeoff, finishes, and calculator result stay with the HHM project record.

Start My HHM Kitchen Design & Remodeling Plan

Method, sources, and limits

HHM uses a source-dated $75–$250 per-square-foot market evidence band as one preliminary planning input. It does not apply a regional cost adjustment and is not calibrated to either Carolina. Current HHM scope, product, labor, permit, access, and site-condition review controls any proposal.

Formula: (room area × $75–$250 per square foot) + the user-selected reserve applied only to that benchmark subtotal + any separate documented cost. Region, scope, and finish are preserved in the summary for discussion but do not change the rates. Sources were reviewed August 3, 2026; the next mandatory source review is November 3, 2026.

What the broad benchmark may represent

A broad editorial allowance for professional kitchen-remodel labor and materials
Normal variation associated with area and general finish level within the publisher’s wide range

What HHM verifies next

A guaranteed list of cabinets, counters, appliances, flooring, lighting, design, permits, freight, tax treatment, repairs, or temporary facilities
Property-specific structural, plumbing, electrical, ventilation, hazardous-material, access, protection, and concealed-condition work
Cabinet-only pricing, financing costs, purchasing decisions, and any HHM or Jarlin price or proposal

Angi — “How Much Does a Kitchen Remodel Cost?” — United States — updated March 17, 2026 — HHM accessed August 3, 2026
Angi — “How Much Does a House Renovation Cost in Charlotte?” — Charlotte, NC — contextual kitchen range, updated July 6, 2026 — HHM accessed August 3, 2026
Angi — “How Much Does a House Renovation Cost in Raleigh?” — Raleigh, NC — contextual kitchen range, updated July 6, 2026 — HHM accessed August 3, 2026
U.S. Bureau of Labor Statistics — Producer Price Index — national construction-cost context only, not a project-price input — HHM accessed August 3, 2026
Houzz — 2026 U.S. Houzz Kitchen Trends Study — 2025 national major-kitchen-remodel survey medians and definitions — published January 13, 2026 — HHM accessed August 3, 2026

The area calculation and national survey median are separate references and are not blended. Published source dates and review dates show when the figures were last checked. HHM reviews the sources before the listed next review date and sooner when a source changes.

Turn the range into a real scope

Send your project details to HHM

Use the planning range to choose the closest budget range in the existing HHM project form. HHM must review the property, scope, selections, delivery, and trade requirements before providing any proposal.

Use the HHM form for project details and scheduling. Please keep highly sensitive information out of this first request. Privacy · Terms

How HHM organizes the project

The project address and requested work let HHM organize the responsible permitting path, required trades, site review, products, scheduling, and project team for the exact scope.

Open the HHM project-request form in a new page

Plan My HHM Project

Choose a site visit or Google Meet. HHM carries the saved project purpose and address into scheduling.

If the form is unavailable, email group@hhmcustomhome.com with a non-sensitive summary and your preferred response method.

PRODUCT + INSTALLATION

Kitchen cabinetry, surfaces and installation package

Bring cabinetry, counters, selected fixtures, finish materials, delivery and HHM installation into one project package. HHM confirms measurements, selections, site conditions and the complete purchase price before checkout.

Build My Installed Kitchen Package

Optional next step — HHM Visual Planning

Add a room concept after you calculate your measured scope

Organize the room before the detailed proposal. Use the HHM Room Designer to connect layout, finishes, visual direction, products, delivery, and installation. Open Room Designer

Your calculator measurements and selections appear below automatically. Add a room photo to compare supported finishes. The room editor uses your photo; it does not automatically resize the room or select products from the calculator.

Linked calculator measurements

Enter the room dimensions in the calculator to connect the visual concept to material quantities.

I have authority to upload this project photo and consent to HHM and its contracted visualization processor using the photo and related activity solely to provide the requested transformation.

Confirm the photo authorization to load the HHM Project Visualizer. Do not upload people, addresses, access codes, documents, or other sensitive information.

Visualization processor privacy information

HHM Kitchen Remodel Preliminary Cost Calculator